KG317T Three Phase Weekly Time Control Switch

II. Functions
1. Mode Settings
Tap the “Always On” button to keep the relay continuously closed.
Tap the “Always Off” button to keep the relay continuously open.
Tap the “Group Timer” button to control the relay according to preset schedules.
Tap the “Countdown” button to control the relay based on a countdown timer.
Tap the “Cycle Timer” button to control the relay with a repeating schedule.
Tap the “Sunset Timer” button to automatically turn on at sunset and off at sunrise. Note: Group Timer settings will be invalid when using Sunset Timer.

2. Add Group Timer
Tap “Add Group Timer” to enter the Add Timer interface.
Tap “Add Timer” to enter the timer setup interface.
Set the ON and OFF times (hour, minute, second) and select the weekdays for which this timer is active.
Tap “Save” to confirm the settings. You can set up to 28 timers per device.

3. Countdown
Tap “Countdown” to enter the Countdown setup interface.
Set the countdown duration (hour, minute, second).
Tap “Execute Action” to select the operation to perform when the countdown ends.
Tap “Save” to confirm the countdown settings.

4. Cycle Timer
Tap “Cycle Timer” to enter the Cycle Timer setup interface.
Set the ON Duration (hour, minute, second) for how long the relay should remain ON.
Set the OFF Duration (hour, minute, second) for how long the relay should remain OFF.
Tap “Save” to confirm the cycle timer settings.

5. Set Password
By default, there is no password.
Tap “Set Password” to create or disable a password. Passwords must be 4 digits.
After setting a password, you can immediately disable it or reconnect to the device and enter the password to disable it. Disabling requires the current password.
When near the device (within 30 cm), you can modify the password without knowing the current password. In the password input interface, the “Cancel” button will change to “Modify Password” when close to the device.

6. One-Tap My Settings
In the Add Group Timer interface, after tapping “Save Timer”, connect to another device.
Tap “One-Tap My Settings” to enter the One-Tap Setup interface.
Tap “One-Tap Setup” to apply the previously saved timer settings to the new device.